Serinol, Solutions et équipement de traitement des eaux

Screw compactors

SERCOMP

The screw compactor SERCOMP ensures the compaction of filtered rejections in the wastewater treatment stations.
Serinol - Solutions et équipements de traitements des eaux SERCOMP
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail

Applications

The screw compactor SERCOMP ensures the compaction of screenings and sieving residues in effluents from wastewater treatment, urban effluents (purification stations), industrial effluents (agrifood: canneries, slaughterhouses, dairy / cheese dairies, washing of fruits and vegetables, slaughterhouse feathers, fish industry – washing areas – chemistry / pharmacy – mechanical and paper industry – agricultural sector: breeding, wine cellars – hotels / restaurants) and processes. Up to 50% the liquid content in the rejected waste can be eliminated.
Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-hotellerie-restauration

Hotel and catering

Serinol Solutions et équipement de traitement des eaux Produit application effluents industrie

Industrial effluents

Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-traitement-des-euax-usees

Wastewater treatment

Serinol Solutions et équipement de traitement des eaux Produit application chimie pharmacie

Chemistry - Pharmacy

Process

Serinol solutions et equipement de traitement des eaux schema principe equipement Compacteur convoyeur a vis SERCOMP

Principles

The screw compactorSERCOMPensures the compaction of filtered rejections in the wastewater treatment stations. It reduces the volume of waste by around 50% and increases the dryness of the compacted rejects.

Advantages

The screw compactor SERCOMP requires little maintenance and can operate without monitoring. For an urban effluent, this compactor ensures a minimum dryness of 25% (objective 30%).
Serinol Solutions et équipement de traitement des eaux Produit avantagessimple

Simple

Serinol Solutions et équipement de traitement des eaux Produit avantages siccite

Dryness

Serinol Solutions et équipement de traitement des eaux Produit avantages sans surveillance

Unattended Operation

Customisation

Options

Extend the possibilities of your equipment.

Compaction

Screw compactor SERCOMP model Ø300 for a maximum of waste to be compacted.

Humidification

Double humidification ramp, with solenoid valve + isolation valve

Construction

Standard stainless construction 304L, 316L steel optional

Compaction zone

Insulation and electrical tracing of the compaction zone (in this case the two side doors are replaced by a single top cover)

Bagger

Baggingequipment.

Design features

The screw compactor SERCOMP consists of the following elements:
  • Housing made of stainless steel sheet with an opening corresponding to the working width of the sieve.
  • In the lower part, a polyethylene lining reduces frictions and the wear of the housing.
  • When the screw compactor SERCOMP is supplied in complement of a rotary sieve SERTAM, an integral hood on the filtering drum and the trough of the screw ensures a complete protection for the operator.
  • A caisson with two lateral doors (*), containing the stainless steel drip drum. This drum (500 mm in length and 210mm in diameter) is made of 304L perforated metal sheet. In the lower part of the caisson, a 76 mm diameter pipe receives the drained water. A fitting to connect to the water supply network, is directed towards the mouth of the preceding tube to clean it. (*) These 2 side doors provide access to the entire surface of the drum for thorough periodic cleaning with the lance. In addition, they allow you to see and clean the mouth of the drip tube subject to clogging.
  • An outlet chute of compacted waste, in which the gate, assembled with adjustable-springs that closes the end of the filter drum, maintains the counter pressure. The back pressure is adjustable by means of a spring hinge.
  • An Archimedes’ screw made of high resistance steel with an external diameter, 150 or 200 mm – depending on the model and the flow rate of the waste to be compacted.
  • A 1,1 KW geared motor to drive the screw.
  • 4 feet in 60 x 60 stainless steel tube with floor fixing plates.

These products could be associated with SERCOMP

Renseignements

Demande de devis équipement

Information

Request for equipment quotation

After sales service

Request for intervention

Information

Request for information

After sales service

Parts request