elevating screen sieve

ECOTEL

The elevating screen sieve ECOTEL model works in the same way as its big brother the elevating screen sieve SERTEL. It is installed in a water channel; the solid matters are stopped by the grid and scrapped up by the scrapers.
Ecotel - Tamis dégrilleur élévateur
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail

Applications

The elevating screen sieve ECOTEL is intended for the treatment of wastewater, industrial effluents (food industry: canneries – chemicals / pharmaceuticals – agricultural sector: wine cellars – hotels / restaurants – washing areas) and processes. Maximum flow rate 20m3/h.
Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-aire-de-lavage

Washing areas

Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-hotellerie-restauration

Hotel and catering

Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-traitement-des-euax-usees

Wastewater treatment

Serinol Solutions et équipement de traitement des eaux Produit application chimie pharmacie

Chemistry - Pharmacy

Processes

Serinol solutions et equipement de traitement des eaux schema principe equipementtamis dégrilleur élévateur SERTEL ECOTEL SERTEL MAX

Principles

The elevating screen sieve ECOTEL model works in the same way as its big brother the elevating screen sieve SERTEL. It is installed in a water channel; the solid matters are stopped by the grid and scrapped up by the scrapers.  This model of screen sieve was designed with the main objective of lowering its price compared to the elevating screen sieve SERTEL, to make it affordable for small Wastewater Treatment Plants (WWTP). In fact, it is intended for small installations for lower flow rates – under 20 m3/h. This objective was achieved by choosing a single working width, by using a smaller motor and by simplifying the chain tensioning system.  The other components are similar to the elevating screen sieve SERTEL INSTALLATION AND OPERATIONLike the elevating screen sieve SERTEL, the elevating screen sieve ECOTEL is very easy to install:  
  • It is introduced into the channel, set at 60°, resting against the downstream edge of the channel (see diagram) or on a crosspiece, if the channel is open downstream.
  •  2 braces are then anchored on the channel wall sides, and two-folded sheets on the downstream part ensure the sealing between the housing and the walls.
  • From the channel bottom to the discharge chute, there is a 1,07m drop for ECOTEL S, 1,44m for ECOTEL N, 1,88m for ECOTEL XL and 2,32m for ECOTEL XXL.
  A level sensor installed upstream rules the operation.

Advantages

Low cost equipment for low flow rates Quick and easy installation of this very compact device. In the case of process application, possibility of having several interchangeable sieves of different meshes. It is intended exclusively for the smallest treatment units, for a peak flow rate of 20 m3/h maximum.
Serinol Solutions et équipement de traitement des eaux Produit avantagessimple

Simple

Serinol Solutions et équipement de traitement des eaux Produit avantages economique

Economic

Serinol Solutions et équipement de traitement des eaux Produit avantages sans surveillance

Fonctionant unattended

Customisation

Options

Extend the capabilities of your equipment.

Box

Box for Installation on ground, with inlet and outlet flanges and overflow weir on side channel with manual grid

Filters

Porous bags made of smooth polypropylene to allow the rejections draining

Probes level

Probes level with fixations

Compactor

Waste screw compactors ECOCOMP or SERCOMP

Panel

Electric panel

Construction

Stainless steel construction 316 L

Design features

The elevating screen sieves ECOTEL consists of the following elements: 
  • A housing made of AISI 304L folded sheet, length of 1,5m, 2m, 2,5m or 3m and total width of 380 mm, to be installed with a 60° inclination angle in a channel.
  • A filter grid: 500 mm in length and 250 mm in width, made of triangular section wires or 15x5mm bars section set on the edge, according to the mesh size. The grid, maintained by two screws, is very easy to change in case of damage. The filtration mesh can be chosen between 0.5 and 40 mm.
  • Scraping assembly
Two lateral chains, built out of stainless steel with rollers in DELRIN plastic, are driven by 2 gear wheels mounted on a stainless steel axis. For slots up to 3 mm, stainless steel wire brushes are used to scrape the grid and push the matters up to the outlet chute.  For 6mm and up slots, plastic combs are mounted. The space between each rake is  close of one mete
  • Motorization:
Motor: 0.37 KW – 380 v – Waterproof IP 55 – Class F
  • Simplified chain tensioning system.

These products could be associated with ECOTEL

Renseignements

Demande de devis équipement

Information

Request for equipment quotation

After sales service

Request for intervention

Information

Request for information

After sales service

Parts request