Trommel, internally fed rotating sieve

SERTROM F

The trommel internally fed rotating sieve SERTROM-F is used for filtering in wastewater treatment plants. The filtering rotating drum is built out of 304L stainless steel perforated sheet. Raw water is introduced into the interior part of the drum via a double chute distributor.
SERTROM FU & FI Serinol tamis rotatif trommel à alimentation interne
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail

Applications

The trommel internally fed rotating sieve SERTROM-FU is intended for urban effluents (purification stations) and the trommel, internally fed rotating sieve SERTROM-FI version for industrial effluents (agrifood: canneries, slaughterhouses, dairy/cheese factories, washing of fruits and vegetables, slaughterhouse feathers, fish industry – chemicals/ pharmaceuticals – mechanical industry) and processes.SERTROM-FI version for industrial effluents (agrifood: canneries, slaughterhouses, dairy/cheese factories, washing of fruits and vegetables, slaughterhouse feathers, fish industry – chemicals/ pharmaceuticals – mechanical industry) and processes. The trommel, internally fed rotating sieve SERTROM-F is the most suitable screen for removing feathers from the wastewater of a poultry slaughterhouse.
Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-traitement-des-euax-usees

Wastewater treatment

Serinol Solutions et équipement de traitement des eaux Produit application effluents industrie

Industrial effluents

Serinol Solutions et équipement de traitement des eaux Produit application agriculture

Agricultural sector

Serinol Solutions et équipement de traitement des eaux Produit application chimie pharmacie

Chemistry - Pharmacy

Process

Serinol solutions et equipement de traitement des eaux schema principe equipement trommel tamis rotatif à alimentation interne SERTROM F

Principles

The trommel internally fed rotating sieve SERTROM-F is used for filtering in wastewater treatment plants. The filtering rotating drum is built out of 304L stainless steel perforated sheet. Raw water is introduced into the interior part of the drum via a double chute distributor. The filtrate passes through the perforations, while the drained products are brought to the output by an internal helicoidal ribbon. In the event of damage to the drum drive, an overflow compartment prevents the effluent from overflowing through the waste outlet chute.

Advantages

The sieve requires little monitoring. There is no driving cross, which facilitates the drum operation. A stainless steel drum with perforations will, for example, be easier to filter sandy water with large bulky items.
Serinol Solutions et équipement de traitement des eaux Produit avantagessimple

Simple

Serinol Solutions et équipement de traitement des eaux Produit avantages sans surveillance

Unattended Operation

Customisation

Options

Extend the possibilities of your equipment.

Gateway

Lateral operating gateway.

Drum

Drum made of triangular section wire – Johnson’s slot.

Construction

AISI 316 L construction.

Compactor

Compacting wastes from the screw compactors SERCOMP or ECOCOMP depending on the model of the trommel, internally fed rotating sieve SERTROM-F used.

Brush

For mesh less than 3mm, a cylindrical brush exterior.

Panel

Electric panel.

Design features

The trommel, internally fed rotating sieve SERTROM-F is entirely hooded. All parts in direct contact with the sludge are made of 304 L stainless steel or plastic materials. The trommel, internally fed rotating sieve SERTROM-F, inclined between 6 and 8 ° following the application, allows an optimal draining of rejections.
Drum
The diameter and the length are determined according to the flow to be treated, the desired mesh and the application considered. Our range of drums counts 8 standard models adapted for flow rates from 20 to 350 m3/ h. The mesh size can be chosen according to the application between 800μm and 20 mm. An internal helicoid ensures the evacu- ation of refusals towards the discharge chute.
INLET CHAMBER
It is designed to have a good effluent distribution on the internal surface of the drum. It favors the discharge of the effluent along two generators located below the drum axis, which allows its distribution on a large sieving surface and a tangential filtration effect.
DRUM CLEANING SYSTEM
It has an external washing ramp with flat jet nozzles topped by an anti-spatter metal sheet. Optionally, we can add an external cylindrical cleaning brush.
TRAINING
Depending on the application, the drum is:Either carried by 2 platic wheels on the entry side and an axis on bearing on the exit side, with direct drive from the geared motor set on the axis with a torque arm – For FU versions (urban effluent).Either carried and maintained by 6 plastic wheels and driven by a rack- and-pinion, this is a solution which leaves the drum outlet absolutely open – by offering a full free passage to the sieving refusals. – For FI versions (Industrial effluent).

These products could be associated with SERTROM F

Renseignements

Demande de devis équipement

Information

Request for equipment quotation

After sales service

Request for intervention

Information

Request for information

After sales service

Parts request