The elevating screen sieve SERTELMAX is the screen sieve SERTEL‘s big brother. It is also used to remove suspended solids in wastewater from urban or industrial treatment plants .
The screen sieve SERTELMAX is used to treat high flow rates, up to several m3 / s, in the treatment of wastewater, urban effluents (treatment plants) and industrial effluents (food industry: canneries, slaughterhouses, dairies / cheese factories, washing of fruits and vegetables – chemistry / pharmacy – mechanical industry ) and in processes. Its specific engineering has been made for an intensive use with high constraints. Its high capability of scraping makes it very effective in extreme conditions. It is also placed on the sieving of river water intended for irrigation in pumping station protection, and also in storm basin protection.
The elevating screen sieve SERTELMAX is the screen sieve SERTEL‘s big brother. It is also used to remove suspended solids in wastewater from urban or industrial treatment plants. To illustrate the big difference in construction, we will simply say that at the same size in length and with:
The operating principle remains the same, meaning that the device is installed in a channel or a pit and without pre-pumping raw water. In its lower part, a 75° inclined flat grid stops the particles, larger than the opening slot , contained in the effluent.
make it possible to choose the appropriate model for each application. Solid wastes are then raised continuously by scrapers towards a discharge chute. The scrapers consist of stainless steel combs, made of 8 mm thick metal sheet.
The elevating screen sieve
SERTELMAX is a very powerful and robust device, capable of extracting large quantities of material.
Combined with a waste screw compactor SERCOMP and a bagger, it considerably reduces volumes and thereforetransportation costs.
The multiple dimensional versions available, in length (up to 12 m) and in width (up to 2 m),
make it possible to choose the appropriate model for each application. Ces racleurs sont des peignes en inox de 8 mm ou 12 mm d’épaisseur.
Its specific engineering has been made for an intensive use with high constraints. Its high capability of scraping makes it very effective in extreme conditions. Its inclination angle is 75°, allowing it to reach deep draughts while reducing the length of the channel. We also can provide this screen at angles of 60° or 85° depending on the application. Robust, easy to install and
does not need such maintenance.
Extend the possibilities of your equipment.
Continuous welding of the housing for better corrosion resistance.
Removable frame in several parts for high length.
Electric panel with level probes.
Possibility of integrating screw compactors SERCOMP or SERCOMP PLUS.
Frequency converter coupled to an ultrasonic level controller to modulate the scraping speed.
AISI 316 L stainless steel construction on request.
The elevating screen sieve SERTELMAX consists of the following elements:
The absence of a lower axis allows the effluent a totally open way towards the grid.