static sieve

SERTIS

The SERTIS static sieve is remarkable from many points of view: it is not very expensive, it is the only one of our devices which does not have a motor and it is the most effective to extract the “soft” matters contained in the water.

SERTIS - Serinol - Solutions et équipements de traitements des eaux
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail

Applications

The static sieve SERTIS is used in the treatment of wastewater, urban sewage (wastewater treatment plants), industrial effluents (food: canneries, slaughterhouses, dairy / cheese – chemistry/pharmacy – mechanical industry – agriculture: farming) and processes .

Mechanical industry

Serinol Solutions et équipement de traitement des eaux Produit application effluents industrie

Industrial effluents

Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-traitement-des-euax-usees

Wastewater treatment

Serinol Solutions et équipement de traitement des eaux Produit application chimie pharmacie

Chemistry - Pharmacy

Process

Serinol solutions et equipement de traitement des eaux schema principe equipement tamis statique SERTIS

Principles

The SERTIS static sieve is remarkable from many points of view:

  • it is the only one of our devices which does not have a motor
  • it is the most effective to extract the “soft” matters contained in the water. (cheese particles, cow stomach content in slaughterhouses, pig slurry, sewage plant sludge), thanks to its tangential filtration effect
  • It is more efficient when it is partially clogged
  • It is cheap

Without a scraper automatically cleaning the grid, it will be necessary to check its state of fouling periodically and to carry out possible manual cleaning actions with the high pressure lance.

In the static sieve SERTIS, the inclined filtering grid is made up of wires with a triangular section arranged horizontally. The space between the wires is chosen according to the degree of filtration required and can vary from 0.25 to 2 mm.
The liquid flow arrives through a weir located upstream of the screen: it first takes a certain speed by passing over a solid plate – a sort of “launching ramp” – then arrives on the filtering panel.
Under the effect of the kinetic energy acquired in the first part of the descent, the solid particles tend to go “straight down”, while the water easily “takes a 90° turn” to cross the screen.
This is called the “tangential filtration” effect, as opposed to normal filtration where the flow and the particles it contains are perpendicular to the filtering surface.

Advantages

The static sieve SERTIS is easy to use and can operate without monitoring.
The profile of its grid provides the best conditions for tangential filtration.
The profile of its grid provides the best conditions for tangential filtration.

Serinol Solutions et équipement de traitement des eaux Produit avantagessimple

Simple

Serinol Solutions et équipement de traitement des eaux Produit avantages filtration tangentielle

Cross-flow filtration

Serinol Solutions et équipement de traitement des eaux Produit avantages sans surveillance

Unattended Operation

Customisation

Options

Extend the possibilities of your equipment.

Compactor

Screw conveyor SERVIS, or screw compactor SERCOMP with bagger

Cover

Full cover on the front

Construction

Standard stainless construction 304L, 316L steel optional

Design features

  • Standard housing is made of AISI 304L, 3 mm thick metal sheet.
    It includes an inlet box with a spillway towards the sieve.
  • The flow enters the inlet box by the top or the sides. The filtered water is then collected in the lower part of the box
  • The grid, made of AISI 304L steel, is folded into 3 slopes depending on the application. It is assembled on a frame, which can rotate over to 180° to allow a periodic thorough cleaning
  • Basic standard cleaning is carried out by 2 water jets ramps, which have to be fed with water under a pressure of 3 bars
  • A more thorough cleaning must be carried out periodically, by tilting the grid to 180 degrees and spraying water with the pressure lance.

These products could be combined with the SERTIS

Renseignements

Demande de devis équipement

Information

Request for equipment quotation

Information

Request for information

After sales service

Parts request

After sales service

Request for intervention