Serinol, Solutions et équipement de traitement des eaux

Elevating screen sieve

SERTEL

The elevating screen sieve SERTEL is used to remove suspended matter in wastewater from urban or industrial treatment stations.
Serinol Solutions et équipement de traitement des eaux Produit tamis degrilleur elevateur SERTEL
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail
Serinol, Solutions et équipement de traitement des eaux,produit détail

Applications

The elevating screen SERTEL is used in the wastewater treatment, in the treatment of urban effluents (wastewater treatment plants) industrial effluents (agrifood: canneries, slaughterhouses, dairy/cheese factories, washing of fruits and vegetables, fish industry – chemicals / pharmacy – mechanical & paper industry – agricultural sector: breeding, wine cellars – hotels / restaurants – washing areas) and in processes.
Serinol-Solutions-et-équipement-de-traitement-des-eaux-Produit-application-aire-de-lavage

Washing areas

Chemistry - Pharmacy

Serinol Solutions et équipement de traitement des eaux Produit application effluents industrie

Industrial effluents

Mechanical industry

Process

Serinol solutions et equipement de traitement des eaux schema principe equipementtamis dégrilleur élévateur SERTEL ECOTEL SERTEL MAX

Principles

The elevating screen sieve SERTEL is used to remove suspended matter in wastewater from urban or industrial treatment stations. It is a simple device, capable of extracting large quantities of material at a very low investment and operating cost. It is robust, with up to a 20-year life span – if ordinary maintenance operations are correctly carried out. Combined with a waste screw compactor SERCOMP and a bagger, it considerably reduces volumes and therefore removal costs. In addition, in the latter configuration, operators are better protected against accidental contact with the residue.The multiple dimensional versions available, in length (up to 10m) and in width (up to 2m), make it possible to choose the appropriate model for a specific application.This equipment, SERTEL, installed in a channel or in a pit, operates over the water and does not need preliminary pumping. In its lower part, a grid inclined at 75 ° – as standard, stops particles of dimensions greater than its air gap . .These particles are continuously scraped towards an outlet chute. The elevating screen sieve SERTEL is the most suitable device for the screening of wastewater with high solid content. The standard minimum mesh is 0.5 mm.

Advantages

Robust equipment, Simple installation and operation (without monitoring). Requires little maintenance. Folded sheets for lateral sealing and cleats for fixing are provided.
Serinol Solutions et équipement de traitement des eaux Produit avantagessimple

Simple

Serinol Solutions et équipement de traitement des eaux Produit avantages robuste

Robust

Serinol Solutions et équipement de traitement des eaux Produit avantages sans surveillance

Unattended Operation

Customisation

Options

Extend the possibilities of your equipment.

Scraping speed

Container

Stainless steel container for floor installation with, inlet, outlet and overflow weir onto lateral channel equipped with a manual grid

Resistives level probes

Electric panel, and capacitive or ultrasonic level probes

Filter

Stone trap placed in front of the device, operated by a pulley / cable system

Compactor

Possible association with a waste screw compactor ECOCOMP, SERCOMP or SERCOMP PLUS, depending on the required dryness

Scraping speed

Frequency converter coupled with an ultrasonic level sensor that can modulate the scraping speed.

Construction

AISI 316 L construction on request

Design features

The elevating screen sieve SERTEL is made up of the following elements:
  • A housing made of stainless steel AISI 304L, 3 mm thick sheet, assembled mainly by bolts
  • A removable filtering grid which consists of triangular section wires up to 6 mm slot maximum, this profile allowing an optimal hydrodynamic flow. For larger slots, it is made of 5 mm thick stainless steel bars, laser-cut and set on edge. Sometimes the grid is made from perforated sheet metal upon customer request.
The length of the grid is 1 meter as standard, but can be changed if necessary. The width of the grid is calculated according to the flow rate, the mesh and the draft (height of water in front of the grid).
  • he scraping system includes: – an axis and two stainless sprockets; – two stainless chains with Delrin plastic rollers, between which rakes are fixed carrying the combs or the brushes – depending on the case; – in the lower part and on each side frame, a fixed cylinder made of polyethylene, around which the chain rollers roll.
The absence of a lower axis allows the effluent a totally open way towards the grid.

MODELS

The length of the elevating screen SERTEL varies from 1.5 to 10 meters, by 500mm increments .More than 1,700 screens SERTEL, ECOTEL or SERTELMAX have been sold all around the world.

These products could be associated with SERTEL

Renseignements

Demande de devis équipement

Information

Request for equipment quotation

After sales service

Request for intervention

Information

Request for information

After sales service

Parts request