The elevating screen sieve SERTEL Vertical is installed in a circular or rectangular pit or in a pumping station and protects the pumps.
The elevating screen sieve SERTEL Vertical is used in wastewater sewage treatment, urban effluent (wastewater treatment plants) and industrial effluents (agrifood: canneries) and processes.
The elevating screen sieve SERTEL Vertical is installed in a circular or rectangular pit or in a pumping station and protects the pumps. In its lower part, a vertical grid made up of 5mm stainless steel bars, spaced at least 10 mm apart, stops particles larger than the opening slot contained in the effluent.
.These particles are continuously scraped towards an outlet chute. These scrapers are fitted with stainless steel “combs” teeth which clean the grid.
The elevating screen sieve SERTEL Vertical is a robust device, easy to install and use. It requires little maintenance and can run without monitoring.
The elevating screen sieve SERTEL Verticalhas a waste extraction capacity 10 to 15 higher than an alternative up and down sieve.
Extend the possibilities of your equipment.
Possible association with a waste screw compactor ECOCOMP, SERCOMP or SERCOMP PLUS, depending on the required dryness
Adapted hopper made of stainless steel allowing the waste to be rejected on the upstream side
Possible integration on this hopper of a manual back-up screen basket, in the case of malfunction of the screen
Electric panel with level probes
AISI 316 L construction on request
The elevating screen sieve SERTEL Verticalconsists of the following elements:
There are 17 models of the elevating screen sieve SERTEL Vertical with length varying from 2 to 10 meters, per 500 mm step.
n standard, we propose 7 different widths – from 250 to 1500mm for this equipment. It will be chosen following the flow rate, slot and draught in front of the grid.