+33 (0)4 68 76 52 52
65 avenue Ernest Léotard,
11150 BRAM




A ribbon Archimedes screw pushes and presses the refusals through Ø3 m perforated metal sheet of the compacting strainer. At the end of it, a back pressure gate maintains the refusals until it forces its opening.
The drained water is gathered and then headed towards the pump station.


The ECOCOMP compactor are composed of the following features :

Casing made of stainless steel sheet with a opening corresponding to the working width of the sieve.
In its lower part, a polyethylene double lining reduces frictions and the wear of the screw.

Closely inspired by SERCOMP model, the main differences are : an unique screw diameter of 150 mm and a length of strainer reduced to 300 mm from 500 mm. In its lower part, this area includes a tubular pipe to retrieve drained water from compacting.

Only one diameter for its Archimedes high-gauge steel screw : 150 mm.


ECOCOMP compactors are usually installed after screening or sieving equipment, in order to reduce the volume of the refusals and their content of water. Cause inspired by SERCOMP, this soft design allows this compactor to be installed for small units of wastewater treatment.

For urban application only, ECOCOMP ensures a 50% reduction of the volume, and 20 % dryness of refusals.


AISI 304 L standard construction, optional 316 L.
Wetting sprays for compacting strainer.
Automatic bagging system.