Télécharger plaquette format PDF

Recrutement

  SCREW CONVEYOR 

PRINCIPLE    DESIGN FEATURES

PRINCIPLE

In our conveyors, the Archimedes' screw ensuring the transfer does not have a central axis. The spire made of high-gauge steel, has such a resistance that it can function while pulling or pushing.

Bound on a side to the moto-reductor by an axis, it is free on the other side. A polyethylene doubling ensures on the one hand a role of soft support and on the other hand avoids the galvanic coupling with the stainless steel constituting the trough.

The absence of a central axis decreases the risks of clogging, particularly with the fibrous matters.

This configuration is used in the construction of our compactors SERCOMP and of our sand classifiers SERSAB.

DESIGN FEATURES

We manufacture three models of conveyors characterised by screw diameters of 200, 300 and 400 mm.

Lengths, supporting feet, chutes of input and output are adapted upon request, just as the engine output power.

CONSTRUCTION

- Box with cover out of 304 stainless steel.

- Polyethylene doubling thickness 8 mm

- High-gauge steel screw

- Motor reducer FLENDER: 15 rpm

Please send an email to serinol@serinol.com for any further information

In order to improve the quality of our equipment, we reserve the right to do any technical modifications which seem necessary. This document has no contractual value.

January 2002